THE HYDROGEN IMPACT ON THE EFFICIENCY AND STEADINESS OF THE ELECTROCHEMICAL MACHINING TREATMENT
https://doi.org/10.15518/isjaee.2015.21.027
Abstract
The electrochemical machining treatment (ECMT) has the several unique characteristics, which give the advantages over the other methods of materials mechanical treatment. The importance of further development of ECMT and the necessity of its technological parameters improvements, stipulated by the rapid integration of CNC machines, are shown. The influence of hydrogen, produced on the cathode during the ECMT, on its stability and efficiency is researched. The conditions, providing the stable ECMT process with the ultimate efficiency, are proposed.
About the Authors
V. K. Dragunov
National Research University “Moscow Power Engineering Institute” (MPEI)
14 Krasnokazarmennaya str., Moscow, 111250, Russia
Russian Federation
Russian Federation
Dr. Sci. (engineering), professor, head of the “Technology of metals” department
G. M. Petrukhin
National Research University “Moscow Power Engineering Institute” (MPEI)
14 Krasnokazarmennaya str., Moscow, 111250, Russia
Russian Federation
Russian Federation
PhD, associate professor of the “Technology of metals” department
References
1. Smolencev V.P., Šarov V.P. Konkurentosposobnye tehnologii èlektrohimičeskih metodov obrabotki // Naukoemkie tehnologii v mašinostroenii. 2013. № 4. S. 43-45.
2. Stroškov V.P., Pšeničnikov V.А. Vysokotočnoe skorostnoe èlektrohimičeskoe formoobrazovanie – èkonomičnyj i resursosberegaûŝij metod metalloobrabotki // Tehnologiâ mašinostroeniâ. 2008. № 6. S. 9-11.
3. Davydov А.D., Kozak E. Vysokoskorostnoe èlektrohimičeskoe formoobrazovanie. M.: Nauka 1990.
4. Zajdman G.N., Korčagin G.N. Ograničeniâ voz-možnosti povyšeniâ proizvoditel'nosti èlektrohimičeskoj razmernoj obrabotki // V sb.: Èlektrodnye processy v tehnologii èlektrohimičeskoj obrabotki materialov. Kišinev: ''Štiinca'', 1980, S. 54-63.
5. Rybalko А.V., Zajdman G.N., Èngel'gardt G.R. Opredelenie vremeni «zapiraniâ» mežèlektrodnogo promežutka v impul'snoj ÈHO // V sb.: Razmernaâ èlektrohimičeskaâ obrabotka detalej mašin. Tula, 1980. S. 231-237.
6. Kozak E. i dr. Issledovanie vliâniâ parametrov processa na tehnologičeskie pokazateli impul'snoj èlektrohimičeskoj obrabotki // VI meždunarodnyj simpozium po èlektričeskim metodam obrabotki (ISEM-6). Krakov, PNR. 1980. S. 309-314.
7. Rybalko А.V., Zajdman G.N. Ènergetičeskie vozmožnosti impul'snoj èlektrohimičeskoj obrabotki metallov // Èlektronnaâ obrabotka materialov. 1979. № 4. S. 17-30.
Review
For citations:
Dragunov V.K., Petrukhin G.M. THE HYDROGEN IMPACT ON THE EFFICIENCY AND STEADINESS OF THE ELECTROCHEMICAL MACHINING TREATMENT. Alternative Energy and Ecology (ISJAEE). 2015;(21):201-206. (In Russ.) https://doi.org/10.15518/isjaee.2015.21.027
Views:
595
Email this article 