Buy (120 RUB)
|Generate QR code
Open Access
Subscription or Fee Access
Modeling test checks for automatic elimination of asynchronous mode
https://doi.org/10.15518/isjaee.2024.01.245-251
Abstract
One of the most complex and responsible kinds of protection in networks with rotating generation, which includes hydrogen fuel generation, is protection against loss-of-synchronism. And it is a challenging task to simulate input signals corresponding to the exact settings of the out-of-step protection to make sure it operates correctly. This is because one has to simulate exact parameters of impedance locus (its radius, coordinates of the center in the impedance plane, spin direction, speed, etc.) while available tools embedded in testing devices often don’t support such parameters directly. To deal with the problem, the authors present the approach to simulate instantaneous values of line currents and phaseto-ground voltages during the out-of-step operation. All the proposed solutions proved to reduce the time required for commissioning of out-of-step protection and thereby increase tests quality and speed.
About the Authors
A. A. Osintsev
Novosibirsk State Technical University
Russian Federation
Russian Federation
Osintsev Anatoliy Anatol’evich - PhD in Engineering Science, associate professor of the Department of Power Station, Faculty of Power Engineering,
K. Marx Ave., 20, Novosibirsk, 630073
E. I. Frolova
Novosibirsk State Technical University
Russian Federation
Russian Federation
Frolova Ekaterina Igorevna - PhD in Engineering Science, associate professor of the Department of Power Station, Faculty of Power Engineering,
K. Marx Ave., 20, Novosibirsk, 630073
References
1. . Gonik Ya. E., Iglitsky E. S. Automatic elimination of asynchronous mode. – M.: Energoatomizdat, 1988. – 112 p.
2. . Narovlyansky V. G.: Application of the ALARM device to identify and eliminate the asynchronous mode of the electric power system: article in scientific. magazine “Energetik” / Narovlyansky V.G., Vaganov A.B. – Moscow: Publishing house “Energoprogress”, 2011. – 17-20 p.
3. . Joint Stock Company «Institute of Automation of Energy Systems» [Electronic resource]. Access mode: http://iaes.ru. Link active on January 27, 2023.
4. . Collection of technical descriptions. Complex of emergency automation devices [Electronic resource] – Relematika LLC, 2015. – 23 p. – Access mode: https://storage.energybase.ru/source/112/NzJaiiWqUK_PCVy98EJDPsldFTprmVs3.pdf. Link active as of January 27, 2023.
5. . Maly A. P. Implementation of automatic elimination of asynchronous mode in cabinets of the SHE2607 series / Maly A. P., Shurupov A. A., Ivanov S. A., Pavlov Yu. N., Koshelkov I. A. // Relay protection and automation , 2010. – P. 39-53.
6. . User manual of Multifunction Generator, Motor and Transformer Protection Relay SIPROTEC4-7UM62, Siemens AG: Germany, 2001.
7. . Modern methods and means of preventing asynchronous operation of the electric power system / V. G. Narovlyansky - M.: Energoatomizdat, 2004. - 360 p.
8. . Digital device for automatic elimination of asynchronous modes [Electronic resource] - STC «UES». Access mode: https://ntcees.ru/departments/products/alar3.php. Link active on January 27, 2023.
9. . Operating manual TIYAK.648229.001.RE: Digital automation for eliminating asynchronous modes ALAR-Ts. Modifications ALAR-C-02, ALAR-C-03, ALAR-C-04.– St. Petersburg: NIIPT, 2008.
10. . Standard instructions for organizing and carrying out work in relay protection devices and electrical automation of substations [Electronic resource]. Available from: https://www.fsk-ees.ru/upload/docs/56947007-29.240.30.004-2008.pdf. Link active on: January 27, 2023.
11. . Megger, J.; Gersusa, J. M. Setting and testing of power swing blocking and out of step relays considering transient stability conditions. In Proceedings of the IET 9th International Conference on Developments in Power System Protection, Glasgow, UK, 17-20 March 2008 [CrossRef].
12. . James, Y; Henville, C. F. Setting out-of-step blocking or tripping using dynamic simulations. In Proceedings of the Western Protective Relay Conference, Spokane, Washington, USA, 18-20 October 2011.
13. . Ambekar, V. A.; Dambhare, S. S. Comparative evaluation of out of step detection schemes for distance relays. In Proceedings of the IEEE Fifth Power India Conference, Murthal, India, 19-22 December 2012 [CrossRef].
14. . Cole, S.; Promel, F.; Josz, P.; Merckx, C.; Karoui, K.; Rese, L. Automatic tuning of out-of-step relays. In Proceedings of the IEEE International Energy Conference (ENERGYCON), Leuven, Belgium, 04-08 April 2016 [CrossRef].
15. . Verzosa, Q. Realistic testing of power swing blocking and out-of-step tripping functions. In Proceedings of the 66th Annual Conference for Protective Relay Engineers, College Station, TX, USA, 08-11 April 2013 [CrossRef].
16. . Patki, S.; Kamin, D.; Suyash, K. Numerical relay testing and validation in relay life cycle. In Proceedings of the CIGRE Paris Session, Paris, France, December 2018.
17. . Apostolov, A.; Vandiver, B.Testing of multifunctional distance protection relays. In Proceedings of the IEEE Power Engineering Society General Meeting, Tampa, FL, USA, 24-28 June 2007 [CrossRef].
18. . Vandiver, B. Why testing digital relays are becoming so difficult! Part 1. In Proceedings of the 67th Annual Conference for Protective Relay Engineers, College Station, TX, USA, 31 March-3 April 2014 [CrossRef].
19. . Vandiver, B.; Apostolov, A. Injected waveforms and their effect on protection element response. In Proceedings of the 70th Annual Conference for Protective Relay Engineers, College Station, TX, USA, 3-6 April 2017 [CrossRef].
20. . Smirnov Yu. L. Requirements for the testing process of relay protection and automation to reduce the human factor / Smirnov Yu. L. // Relayman. – 2021. – No. 1 (39). – pp. 28-32.
21. . Volokhov, N. A. Study of the influence on the operation of ALAR devices of disturbances that arise after the start of the asynchronous mode / N. A. Volokhov // Electric power industry through the eyes of youth-2019: materials of the anniversary X International Scientific and Technical Conference, Irkutsk, September 16-20 2019. Volume 1. – Irkutsk: Irkutsk National Research Technical University, 2019. – P. 243-246.
22. . A method for obtaining an asynchronous mode hodograph with specified characteristics for checking the operation of a remote control / V. E. Glazyrin, I. I. Litvinov, A. A. Osintsev, E. I. Frolova // Electric stations. – 2018. – No. 6. – P. 36-41.
23. . Litvinov, I. I.; Marchenko, A. A.; Gracheva, E. I. On Methods of Checking Digital Out-Of-Step Protection Devices. E3S Web of Conferences 2020, 220, 01081 [CrossRef].
24. . Litvinov I. I. Development of methods and means for checking remote and current ALAR / I. I. Litvinov, A. A. Marchenko // Bulletin of the North Caucasus Federal University. - 2020. – No. 6 (81). – pp. 17-25.
25. . Method for obtaining the impedance locus of stable swings with specified characteristics on the complex plane / I. I. Litvinov, A. A. Osintsev, E. I. Frolova, A. A. Marchenko // Bulletin of the Kazan State Energy University. - 2020. – T. 12, No. 1 (45). – P. 93-100.
26. . Glazyrin, V. E.; Litvinov, I. I.; Osintsev, A.A.; Frolova, E. I.Automation of distance relay testing, In Proceedings of the 20 International conference of young specialists on micro/nanotechnologies and electron devices, Altai Republic, Erlagol, Russia, 29 June – 3 July 2019 [CrossRef].
27. . Checking the remote control of RP and PA devices in asynchronous mode using standard means of the RETOM testing complex / A. A. Osintsev, V. E. Glazyrin, I. I. Litvinov, E. I. Frolova // Electric stations. – 2017. – No. 10. –- pp. 32-37.
28. . Certificate of state registration of a computer program No. 201961125006, 02/21/2019: “Obtaining a hodograph with given parameters on a complex plane” // I. I. Litvinov, A. A. Osintsev, E. I. Frolova, F. V. Poddubnyak.
29. . Certificate of state registration of a computer program No. 2019612683, 02.26.2019: “Obtaining a circular hodograph of the resistance vector with a constant effective current value” // I. I. Litvinov, A. A. Osintsev, E. I. Frolova.
30. . Certificate of state registration of a computer program No. 2019612684, 02.26.2019: “Obtaining a circular hodograph of the resistance vector with a constant effective voltage value” // I. I. Litvinov, A. A. Osintsev, E. I. Frolova.
31. . Certificate of state registration of a computer program No. 2020618128, 02/26/2019: “Obtaining a hodograph of synchronous swings with given parameters on a complex plane” // I. I. Litvinov, A. A. Marchenko, A. A. Osintsev, E. I. Frolova.
Review
For citations:
Osintsev A.A., Frolova E.I. Modeling test checks for automatic elimination of asynchronous mode. Alternative Energy and Ecology (ISJAEE). 2024;(1):245-251. (In Russ.) https://doi.org/10.15518/isjaee.2024.01.245-251
Views:
61
Email this article 