Buy (120 RUB)
|Generate QR code
Open Access
Subscription or Fee Access
Improve the accuracy of the mass of gas test flowmeter order to obtain reliable characteristics of components and assemblies characteristics of the liquid rocket engines
Abstract
A method of definition of sensitivity threshold and a way of instability elimination of a weight-measuring device balancing of a facility for gas flow meters calibration by weighting are presented in the paper. Instability balancing in the range of weighed gas masses of 1.5-18 kg will be from 0.13 to 0.011%. So, to increase the measurement accuracy of the gas flow rate, the calibration duration and gas mass in a gas inlet vessel should be increased to the maximum possible values. The accuracy in determining the device characteristics to be calibrated will not exceed 0.25%, which is significantly lower than the existing methods.
About the Authors
K. V. Kruzhaev
OSC KBKhA
Russian Federation
Russian Federation
Y. V. Demjanenko
OSC KBKhA
Russian Federation
Russian Federation
References
1. Абрамович Г.Н. Прикладная газовая динамика. В 2 ч. Ч. 1. М.: Наука, 1991. С. 600.
2. Друзьякин И.Г, Лыков А.Н. Технические измерения и приборы. Пермь: Изд-во Перм. гос. техн. ун-та, 2008. С. 412.
3. Кружаев К.В., Ермошкина Л.Г., Качанов Г.К. Повышение точности измерения массового расхода газа с использованием критических газовых расходомеров // Ракетно-космическая техника и технология. 2011. С. 133-140.
4. ГОСТ 8.381-2009 ГСИ. Эталоны. Способы выражения точности. М.: Стандартинформ, 2011. С. 18.
5. РД 50-213-80. Правила измерения расхода газов и жидкостей стандартными сужающими устройствами. М.: Издательствово стандартов, 1982. С. 319.
6. Пирумов У.Г., Росляков Г.С. Газовая динамика сопел. М.: Наука, 1990. С. 368.
Review
For citations:
Kruzhaev K.V., Demjanenko Y.V. Improve the accuracy of the mass of gas test flowmeter order to obtain reliable characteristics of components and assemblies characteristics of the liquid rocket engines. Alternative Energy and Ecology (ISJAEE). 2014;(3):10-14. (In Russ.)
Views:
266
Email this article 